Sheet to Sheet Thermal Laminating inline embossing machine
This machine is automatic solution for sheet paper thermal lamination as well as embossing jobs. The advantages are not limit to small volume, low power consumption, easy operation and high degree of automaticity. The machine is composed of feeding assembly, laminating assembly, embossing assembly, cutting assembly, automatic collecting assembly and electrical control.
1. Independent servo control has been adopted for the feeding assembly so as to ensure stable and accurate sheet conveyance.
2. Laminating assembly heating roller is a mirror polish one. It is internally two-layer structured and inter-layer is filled with organic heat conduction material which helps the warm-up roller achieve quick rise in temperature, uniform and constant in surface temperature and good in temperature supplement; Electric oil pressure pump is adopted as its mode of pressure closing which features large pressure and automatic pressure supplement so as to ensure pressure at a constant level; This assembly features 20-second automatic pressure disjointing function, that is, rubber roller will automatically separating from warm-up roller after 20-minute shut down given a uninterrupted power so as to avoid damages on pressure rubber roller when it forgotten to be shut off by the operator.
3. Pneumatic popup cutting is adopted for the cutting assembly and it features stable cut, simple adjustment which has greatly improved the production efficiency and saved labor force.
4. Pneumatic sheet flyer delivery is adopted for the collecting assembly so as to ensure the sheets well stacked after the cutting.
5. Famous brands such as Siemens, Schneider, Omron and Delta are applied as the main electrical components for the machine which are stable and reliable.
More Innovations,
1. Magnetic clutch tension controller – for better laminated paper tension controling;
2. Rotate Sandpaper knife (with perforating knife and cutter for optional) – faster speed and surface protection for paper laminating work;
3. Automatic Hydraulic station – high pressure and same time protection the rubber rollers;
4. Power Phase Order Monitor – If power phase is wrong ordered, the machine can not run and screen will show alarm;
5. Collecting Unit optimization – one more sensor is installed for testing separated laminated sheet and mechanical part also upgraded. 6. Pneumatic System upgardes – install 2 more air flow adjuster with gauges.
| Max Sheet Size | 540×780 mm |
| Min Sheet Size | 210×270 mm |
| Application Paper Weight: | 157 – 400 g/㎡ |
| Work Speed | 30-45 m/min |
| Power Supply | 3phase AC440V, 60Hz (Or AC380-400 50HZ) |
| Lamination Heating Power | 7.5 Kw |
| Main Motor (Siemens) | 7Kw |
| Total Power | 20Kw |
| Maximum Temperature | 140℃ |
| Temperature Control | PID |
| Overall Dimension （L×W×H） | 3300×1215×1700 mm |